2 Count (Pack Of 1)

NOTE: – This PIR motion sensor light bulb CAN NOT work through glass or any lamp covers, as the bulb top must be completely exposed. -The bulb should be installed downward and no higher than 13 feet, or the sensor will not work. -Stay away from places where there is direct sunshine, air conditioner, dryer, heater or strong electromagnetic wave, so as to avoid interference. -If intend to use the bulb for outdoor fixtures, please find a way to protect it from water yet no blocking the sensor parts on the top of bulb. -Supports only normal switch and should always be turned on switch, and other switches like sound and light control switches, human body touch switches, human body sensor switches, sound and light control lamp Stand DO NOT work with the motion bulb. -Please DO NOT make purchase if fail to agree with the above instructions! Feel free to us if not quite sure. Specification: Wattage: 9W Detection distance: 9-20 feet Shut down delay: 30 seconds Features: Reacts only to human or animal motion. Light off delay down to 30 seconds to meet our actual needs. Continuous movement keeps the light always on. FAQ -Q: Can not light after installing? A: The bulb only lights when the brightness is lower than 10 LUX AND someone passing by. -Q: Can not light after driving car into garage, Is this bulb defective? A: Radar sensor bulb is better, while the PIR senser bulb can light only when the people get off the car. Good Quality and service from Do not waste your time, good quality, DO NOT LIKE, immediately free ▶#Quality Inspection mode: Whether it is day or night, it will Light up for 60 senconds.# This is the latest model of motion sensor light bulb.Translucent cover uses custom material, high light transmittance, uniform light diffusion, it also has ultra-sensitive intelligent dual probe technology. When the environment is bright, it does not work at all. When the environment is dark, it starts to work. Very suitable for stairs, hall way, bathroom, storage room, balcony, gate and so on. ▶Advanced lighting control technology – enables smart sensor bulbs with built in dusk-to-dawn sensor. light bulbs will automatically get into the detecting mode when the darkness lower than 10lux (this happen at dusk or during night time when darkness falls). Led light bulb will turn on when the motion detector is activated.It will not be turned on in the daytime as the light intensity raises up to 10 Lux, that can save energy, extend bulb long life. ▶PIR smart Infrared thermal motion technology-light bulb Motion sensor with the smart infrared induction detecting model that turns lights on automatically when human or animal movement in darkness within the detection range. It will turn off about 30 seconds after you leave the area.The detection distance is around 9-20 feet given the certain installing height and other factors. This PIR motion sensor light bulb DO NOT work through glass or any lamp covers and must be installed downward. ▶Smart continuously detecting movement technology – LED Motion sensor light bulbs keeps detecting human activities within the detection range. if you haven’t left the area, it will turn on all the time even if 30 seconds passes. The 30-second countdown will start from your last movement, so you do not need to worry about the IR motion sensor light bulb will suddenly turns off when you still stand in the detection range. ▶Notice – Note the E26 motion sensor light bulbs comes with a sensor switch and can only be mounted on an ordinary lamp Stand. It cannot be used in sound and light control switches, human body touch switches, human body sensor switches, sound and light control lamp Stand.