Energy saving, t12 4ft bulb can help you save up to 55% on your electricity Bill! No ballast,replace traditional T8 T10 T12 fluorescent bulbs. Color Temperature: 4000K Natural White / 6000K-6500K Cool White.
No ballast,replace traditional T8 T10 T12 fluorescent bulbs. Power: 22W. Luminous Flux: 2400LM. It’s up to your choice. Each tube has protected well. Color Temperature: 4000K Natural White / 6000K-6500K Cool White.
As a full experience manufacturer in the LED industry. Here we publish the most concerned questions from buyers, which are as follows. Welcome to consult us if you have any questions about our products. Q1: Can the LED tube replace fluorescent? A1: Sure, it can be installed into your traditional fluorescent fixture after the existing ballast is removed or bypassed. As far as I know, many 4ft fluorescent models used in the USA number is F32T8/XXX. So don’t hesitate to buy this light shown on the page if you wanna save electricity bill while offering much illumination than before. Q2: How to wire if I am going to install your LED to a new fixture? A2: 110V or 277V Live wire at an end, Neutral at the opposite one. Q3: Does it fit for a non-shunted tomestomb or shunted? A3: Non-shunted Store category Sign Up Now ! You may also like HMINLED 48 inch LED Tube Light 22W 6000K Bright Cool White Bypass Ballast 10/25x Product Description As a full experience manufacturer in the LED industry. Here we publish the most concerned questions from buyers, which are as follows. Welcome to consult us if you have any questions about our products.Q1: Can the LED tube replace fluorescent?A1: Sure, it can be installed into your traditional fluorescent fixture after the existing ballast is removed or bypassed. As far as I know, many 4ft fluorescent models used in the USA number is F32T8/XXX. So don’t hesitate to buy this light shown on the page if you wanna save electricity bill while offering much illumination than before.Q2: How to wire if I am going to install your LED to a new fixture?A2: 110V or 277V Live wire at an end, Neutral at the opposite one.Q3: Does it fit for a non-shunted tomestomb or shunted?A3: Non-shuntedQ4: Can the LED light tube be installed in commercial buildings?A4: Absolutely, it would works with 277V.Q5: My fixture is T10 or T12. Can I buy this light?A5: Go ahead if that base is the same as T8, which shows in my picture, named G13. Only the diameter is different between T12 and T8. T12’s is 1 1/3 inches, T8’s is 1 inch. Tips: T8 couldn’t be installed in the T5 fixture.Q6: What’s the use for the repair parts (driver) shown on the option?A6: The driver, someone called it as transformers, can repair the lamp that isn’t lit up. We’ve gathered lots of feedback from our consumers that they are able to fix damaged tube by themselves, so the repair parts offered in this listing. Please don’t choose this option if you need LED tubes.Crucial specifications you need to focus onColor Temperature: 6000k – 6500kPower: 22 wIllumination: 2400 lmInput Voltage: 110v, 277vWiring Method: double-end powered About P.O BOXPlease fill your physical address into order. Because P.O BOX is only recognized by USPS. Payment Delivery details Feedback Note Contact us Payment 1.We accept eBay payment only. 2.Payment is needed within 2-3 business days once you have purchased the products. 3.We give positive feedback immediately after payment is receivd. Delivery details 1.From Monday to Friday, we ship the goods everyday.For Saturdays,sundays and holidays,shipment is not avialible. 2.All orders will be shipped within 2 working day after payment and some could be shipped even within 24 hours. 3.We ship the item(s) by FedEx,UPS or USPS. Please note we will select the fast, reliable and economic way for delivery.If you need to use a special carrier,please email us and let us know. 4.Please leave you avialable address and phone number in delivery information. We are not responsible for wrong or undeliverable address and phone numbers. 5.For friends in remote area,there is a extra charge for shipping fee. Please confirm your address can get UPS/USPS/FEDEX ect.service before buying. 6.Your understanding and cooperation would be highly appreciated! Feedback 1.We will be appreciated that all our customers can post a positive feedback, comment and 5-star DSRs(Detailed Seller Ratings)after you receive the item. 2.We need your positive feedback support :your support really give us power to constantly providing good products and excellent customer service, could you please kindly leave me a positve feedback and 5 star ratings? thanks you very much in advance . We will solve any problem for you at the first time : if there is anything wrong about the product please contact us first before leaving neutral or negative feedback, we promise that we will solve the problem to your full satisfaction. 3.We will strive to provide best after-sales service and warranty to satisfy you. Note 1.Please note that we cannot ship to a PO Box/APO/FPO. We recommend that you leave us with your physical address. 2.Before you want to buy our item(s),please check your address!3.If your product has not arrived within the estimated delivery time, please contact us. Once the parcel was confirmed as lost by the post office/couriers after 14-20 working days waiting, a new item will be sent out or we will refund you full money. Contact us Welcome to our store.1.We are rapid growing online retailers, which target on eBay market since 2015.We provide manufacturer direct deals at great bargains for our customers.We are dedicated to offering you an unrivalled choice of products with lowest price and best quality. 2.We pay attention to every piece of customer feedback we receive.We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us.
Energy saving, 4 bulb ballast can help you save up to 55% on your electricity Bill! No ballast,replace traditional T8 T10 T12 fluorescent bulbs. Item: led tube light 4 foot. It’s up to your choice.
T12 led bulb t12 led bulb. T8 LED bulbs are made of aluminum. Compared with the glass light tube, ballast bypass bulbs not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years).
They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever. 【EASY BALLAST BYPASS INSTALL】 – T8 4Foot LED light bulbs are dual-end powered and require a simple, energy-saving, ballast bypass (direct wire) installation.
Upgrade your lighting with these 4-foot T8 LED tube lights featuring double-end ballast bypass installation for straightforward setup that standard fluorescent wiring. The aluminum construction ensures superior heat dissipation compared to plastic alternatives, maintaining optimal performance and extending the lifespan of the LED components.
Each t8 led bulbs 4 foot ballast bypass 4000k has a low power consumption of 22w, instantly saving you 80% on your electricity bill when you replace your old 60 watt fluorescent tube with 4ft led bulbs.
T8 LED bulbs are made of aluminum. Compared with the glass light tube, 48 led light bulbs ballast bypass not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years).
22W G13 4′ LED Shop Light Bulbs 6000K Single-end 25pack 4FT T8 LED Tube Light Top Rated T8 LED Tube Single Sided Ballast Bypass Type B with G13 Base Package list 25 x single-end tubes (selecting the type of lens you need) 1 x manunal SINGLE ENDED POWER (SEP) Use with non-shunted tombstones (not included) to convert existing fixtures to LED for instant energy savings (up to 85%). milky single ended tube light help you avoid costly ballast replacement and provide instant bright light with no flickering. COMMERCIAL GRADE We test each product for optimal performance and safety. Specifications: Length 4ft (48″ »), 110-277V, 160° Beam Angle, Instant Start, 50,000 hour Lifetime. EASY INSTALL Follow our installation guide for a quick and easy setup. Rewire your fixture to disconnect and remove or bypass the existing ballast, then connect live and neutral wires from the power source to corresponding socket wiring. Requires non-shunted tombstones (not included). What size are LED T8 tubes? Do they fit in a T12 size fixture? The same G13 bi-pin connector can be found on both T8 and T12 LED Tube lights. The T8 LED Tubes we sell are approximately 1.12” in diameter. An average T12 is about 1.5” in diameter. The same connector means that you can theoretically use a single end led tube wiring bypass ballast to replace a fluorescent T12 tube light, as it should fit in the socket – and vice versa. What are tombstones? Do I want shunted or non-shunted tombstones for my LED T8 tubes? Tombstones are sockets used in a shop light to hold the light tube into place and direct the power. You need non-shunted tombstones for single ended t8 t12 milky led bulbs (SEP). These are ideal as a fluorescent tube replacement for your existing garage shop lights. Electrical current flows through multiple tracks or paths in a non-shunted tombstone. Their contacts are not connected or joined and they bypass the ballast. For safety reasons, a qualified electrician should perform any retrofitting. Will LED T8 Linear Tubes become dim over time like a fluorescent tube? No, LED T8 tubes do not have the light quality degradation issues that occur with fluorescents. The darkening of aged fluorescent tubes is caused by a loss of phosphors and mercury, neither of which is used in our T8 LEDs. What does single-ended (SEP) mean regarding LED tubes? Single-ended Power (SEP) tubes – hot and neutral are on one side of the tube. The non-shunted tombstones (sockets) used with this type will have power on one end.
Besides, 4 feet t8 led has shatterproof property because it is equipped with an aluminum body and a clear lens. Energy Saving – Save up to 55% on your electricity Bill! Work with no ballast – Existing ballast needs to be removed or bypassed, fitted to replace traditional T8 T10 T12 fluorescent bulbs.
T8 LED bulbs are made of aluminum. Compared with the glass light tube, led fluorescent lights no ballast not only have a larger luminous surface, but also safer. Moreover, the aluminum light tubes can better dissipate heat and increase the service life of the fixture(50,000+ hour lifespan, last up to 20+ years).
