4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
Store category Sign Up Now ! You may also like Product Description Plug & Play – T12 High-Output Fluorescent Tube Replacement – R17D Base 64 Inch T12/HO/RDC waterproof LED directly relamps and replaces the 76/80 watt 64″ fluorescent bulb F64T12/HO without rewiring or modification. It’s a Plug and play product from our « Relamp Series » when switching to LED lighting. T12/HO bulb works with traditional magnetic ballasts and modern electronic ballasts for maximum convenience. Also fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts. Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T12/HOSwitch on powerGeneral Specifications:Energy saving of 48% from 76/80 watts to 42 watts with 4620 lumens outputEnergy saving of 38% from 76/80 watts to 50 watts with 5500 lumens outputAll plastic diffuser for better light distribution, less spot reflectionsO Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applicationsHeavy duty aluminum heat sink ensures the LED run cooler for longerPlastic and aluminum construction ensures less breakageLong life span of > 50,000+ hoursHigh lumen output > 110 lumens/wattAvailable in 2700, 3000, 4100, 5000, 6000 KelvinUses 42,50 watts = 76/80 watts equivalent2,3 bulbs per packageSingle Sided – 4620 lumensDual Sided – 5500 lumensNominal length 64-inch T12 (1-1.5inch diameter) Maximum overall length (M.O.L): Approx. 61.91” (1572.5 mm) with pins A.k.a T-12 High output Recessed Double Contact (RDC)Rotatable R17d end cap that swivelsEnd cap can be adjusted regardless of socket orientation in the signSpecial application lamps that are designed for cold weatherTechnical description: F64T12/HO, F64″T12/HO/RDC, High output T12 HOSuitable as Walk-in Cooler, Freezer and Refrigeration equipment lightingIdeal for vertical or horizontal installation, single-sided or double-sided signs Perfect for Gas stations, Signage, Billboards, cold weatherWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatible Additional information:T12/HO LED lamp requires 4 wires connected. It’s not compatible with 2 wires setup such as Allanson EESB ballastsPictures of the gas price sign and company sign are installed with the relamp 3FT and 6FT Daylight T12/HO waterproof lamp. Pictures are taken and provided by our customersEquivalent replacement for:F64T12/CW/HO F64T12/D/HOF64T12/SGN/HOF64T12/DSGN50/HO F64T12/WW/HOF64T12/C50/HO Why Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY.
Rotatable R17d end cap that swivels. NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts.
4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
Store category Sign Up Now ! You may also like Product Description Plug & Play – T8 Medium Bi-Pin Fluorescent Tube Replacement – G13 Base 26 Inch T8 LED lamp directly relamp fluorescent bulbs F16T8, F18T8, F22T8, F26″T8, F20T12 without rewiring or modification. It’s a Plug and play product from our « Relamp Series » when switching to LED lighting. T8 LED bulb works with traditional magnetic ballasts and modern electronic ballasts in the market, so you can plug it in and quickly enjoy bright lighting. It’s fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and magnetic ballasts.Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T8/T12 TubeSwitch on power General Specifications: Energy saving of 37% from 19 watts to 12 watts with 1320 lumens outputAll plastic diffuser and construction for better light distribution, less spot reflectionsLong life span of > 50,000+ hoursHigh lumen output > 110 lumens/wattAvailable in 2700, 4100, 5000, 6000 Kelvin2700 kelvin warm white light appearanceUses 12 watts = 16 to 22 watts equivalent1 bulbs per package1320 lumensNominal length 26-inch T8 (1-inch diameter)Maximum overall length (M.O.L): Approx. 25.78” with pinsT8 bulb shape, medium bi-pin base, 13 mm pin spacingTechnical description: F16T8, F18T8, F22T8, F26″T8, F20T12For indoor, commercial and residential usePerfect for Desk and General lightingIdeal for general purpose applications including bathrooms and kitchensWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatibleEquivalent replacement for:GE 10702 – F26”T8/CW/4GE 10253 – F20T12/CW/26Damar 00616F – F18T8CW/26Philips 259895 – F16T8/CW/26Philips – F22T8/CW/26 Sylvania/Osram F18T8CW/K/26 (18W)Sylvania 22081 F20T12/CW26 (20W)Sylvania 23026 F22T8/CW/26 (22W)F16T8/CW/26F18T8/CW/K/26F22T8/CW/26F26″T8/CW/4F20T12/CW/26Why Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. For shipping to Alaska and Hawaii, please contact seller for shipping rates. Payment Delivery details Terms of sales About us Contact us Payment We accept the following: PayPal MastercardVisaAmerican Express Discover Delivery details Has my order been shipped? You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take a longer processing time, please allow time for USPS page to populate. Terms of sales How do I cancel my order?As we process orders automatically, it may not be possible to cancel an order between the times of placing the order and delivery. Please email our sales team for further assistance. Returns, Replace, Refunds & CancellationsHow can I return my product and request a refund?We hope you are entirely satisfied with your purchase, but if you are dissatisfied, we will issue a refund within 30 calendar days from the date of delivery of the product. You should email us for steps to take on returns, defective LED or order cancellations etc. About us About New York LED Luminaries (NYLL) NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts. Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder. Contact us You can contact NYLL support from 9am-5pm EST, M-F. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.Ordering in Bulk? We can help.Contact us via email 9am-5pm EST, M-F for more information. PaymentShippingReturn policyAbout us
Store category Sign Up Now ! You may also like Product Description Plug & Play – T8 Medium Bi-Pin Fluorescent Tube Replacement – G13 Base 33 Inch T8 LED lamp directly relamp fluorescent bulb F25T12/WW/33 without rewiring or modification. It’s a Plug and play product from our « Relamp Series » when switching to LED lighting. T8 LED bulb works with traditional magnetic ballasts and modern electronic ballasts in the market, so you can plug it in and quickly enjoy bright lighting. It’s fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and magnetic ballasts. Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T8/T12 TubeSwitch on powerGeneral Specifications:Energy saving of 48% from 25 watts to 13 watts with 1430 lumens output All plastic diffuser and construction for better light distribution, less spot reflectionsLong life span of > 50,000+ hoursHigh lumen output > 110 lumens/wattAvailable in 2700, 4100, 5000, 6000 Kelvin2700 kelvin warm white light appearance Uses 13 watts = 25 watts equivalent 1 bulbs per package1430 lumensNominal length 33-inch T8 (1-inch diameter)Maximum overall length (M.O.L): Approx. 32.78” with pinsT8 bulb shape, medium bi-pin base, 13 mm pin spacingTechnical description: F25T12/WW/33Perfect for General lighting fixtures, kitchen work spaces Ideal for general purpose applications including bathrooms and kitchens Works with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatible Equivalent replacement for: GE, General Electric – F25T12/CW/33GE, General Electric 38201 – F25T12/CW/33GE, General Electric – F25T12/D/33 Sylvania 22560 – F25T12/CW/33Sylvania 22562 – F25T12/WW/33Sylvania 22559 – F25T12/WWX/33Sylvania 22569 – F25T12/W/33Sylvania 22563 – F25T12/D/33 Why Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. For shipping to Alaska and Hawaii, please contact seller for shipping rates.
Store category Sign Up Now ! You may also like Product Description Plug & Play – T6 Single Pin Fluorescent Tube Replacement – FA8 Base 64 Inch T6 Single Pin LED directly relamp and replace the 38 watt 64″ fluorescent bulb F64T6 without rewiring connection or modification. It’s a plug and play product from our « Relamp Series » when switching to LED lighting. T6 LED bulb works with traditional magnetic ballasts and modern electronic ballasts in the market, so you can plug it in and quickly enjoy bright lighting. It’s fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and magnetic ballasts. Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T6 TubeSwitch on power General Specifications:Energy saving of 50% from 38 watts to 19 watts with 2090 lumens output
Store category Sign Up Now ! You may also like The InstantFit LED Lamp Can Quickly & Effectively Replace CFL lamps. Offers Cheapest & Easiest Upgrade To LED Lighting Technology Product Description Plug & Play – 4-Pin Compact Fluorescent Bulb Replacement – 2G11 Base Type PL-L LED lamp directly relamp and replaces linear compact fluorescent Light bulb (CFL) PL-L 36W, F39BX, FT36DL without rewiring or modification. It’s a Plug & Play product from our « Relamp Series » when switching to LED lighting. Our PL-L LED lamp bulb works with traditional magnetic ballasts and modern electronic ballasts in the market, so you can plug it in and quickly enjoy bright lighting. It’s fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and magnetic ballasts. Installing the lamp, as easy as changing a bulb: Turn power OFF before installation Remove the existing lamp Install LED PL-L lamp Switch on power General Specifications: Energy saving of 55% from 36 watts to 16 watts with 1760 lumens output All plastic diffuser and aluminum construction for better light distribution, less spot reflections Heavy duty aluminum heat sink ensures the lamp runs cooler for longerPlastic and aluminum construction ensures less breakageLong life span of > 50,000+ hours High lumen output > 110 lumens/watt 6000 kelvin daylight light appearance Uses 16 watts = 36 watts equivalent 1 bulbs per package 1760 lumens 4-Pin, 2G11 Base type connectorMaximum overall length (M.O.L): Approx. 16.4” with pinsTechnical description: PL-L 36W, F39BX, FT36DL Perfect for garage, basements, warehouses and industrial buildings Ideal for commercial interior lighting applications in 2’x2′ fixtures,1’x2′ fixturesWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatibleEquivalent replacement for: PL-L 36W/830PL-L 36W/835PL-L 36W/841F39BX/SPX30F39BX/SPX35F39BX/SPX41FT36DL/830FT36DL/835FT36DL/841Why Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. For shipping to Alaska and Hawaii, please contact seller for shipping rates.Payment We accept the following: PayPal MastercardVisaAmerican Express Discover Delivery details Has my order been shipped? You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take longer processing time, please allow time for USPS page to populate.
4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
Store category Sign Up Now ! You may also like Product Description Plug & Play – T12 High-Output Fluorescent Tube Replacement – R17D Base
4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
