4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
Easily upgrade your lighting with our PL LED lamp. No rewiring or modification needed—just plug and play. Install LED PL. All plastic and aluminum construction for better light distribution and reduced spot reflection.
4-Pin, 2G11 base-type connector. Easily upgrade your lighting with our PL-L LED lamp. No rewiring or modification needed—just plug and play. Relamp LED products are designed and developed by New York LED Luminaries, Inc., Brooklyn, NY.
Easily upgrade your lighting with our PL LED lamp. No rewiring or modification needed—just plug and play. Install LED PL. All plastic and aluminum construction for better light distribution and reduced spot reflection.
Easily upgrade your lighting with our PL LED lamp. No rewiring or modification needed—just plug and play. Install LED PL. All plastic and aluminum construction for better light distribution and reduced spot reflection.
PL-F 4P 27W. Easily upgrade your lighting with our PL LED lamp. No rewiring or modification needed—just plug and play. Install LED PL. All plastic and aluminum construction for better light distribution and reduced spot reflection.
Easily upgrade your lighting with our PL LED lamp. No rewiring or modification needed—just plug and play. Install LED PL. All plastic and aluminum construction for better light distribution and reduced spot reflection.
Store category Sign Up Now ! You may also like Product Description Plug & Play – T12 High-Output Fluorescent Tube Replacement – R17D Base 7 FT T12/HO/RDC waterproof LED directly relamps and replaces the 95/100 watt 84″ fluorescent bulb F84T12/HO without rewiring or modification. It’s a Plug and play product from our « Relamp Series » when switching to LED lighting. T12/HO bulb works with traditional magnetic ballasts and modern electronic ballasts for maximum convenience. Also fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts. Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T12/HOSwitch on power General Specifications:Energy saving of 50% from 95/100 watts to 50 watts with 5500 lumens outputEnergy saving of 35% from 95/100 watts to 65 watts with 7150 lumens outputAll plastic diffuser for better light distribution, less spot reflectionsO Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applicationsHeavy duty aluminum heat sink ensures the LED run cooler for longerPlastic and aluminum construction ensures less breakageLong life span of > 50,000+ hoursHigh lumen output > 110 lumens/watt6000 kelvin daylight light appearance Uses 50,65 watts = 100 watts equivalent4,5 bulbs per packageSingle Sided – 5500 lumensDual Sided – 7150 lumensNominal length 84-inch T12 (1-1.5inch diameter) Maximum overall length (M.O.L): Approx. 81.91” (2080.5 mm) with pins A.k.a T-12 High output Recessed Double Contact (RDC)Rotatable R17d end cap that swivelsEnd cap can be adjusted regardless of socket orientation in the signSpecial application lamps that are designed for cold weatherTechnical description: F84T12/HO, F84″T12/HO/RDC, High output T12 HOSuitable as Walk-in Cooler, Freezer and Refrigeration equipment lightingIdeal for vertical or horizontal installation, single-sided or double-sided signs Perfect for Gas stations, Signage, Billboards, cold weatherWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatible Equivalent replacement for:F84T12/CW/HOF84T12/D/HOF84T12/SGN/HOF84T12/DSGN50/HOF84T12/C50/HO Why Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. Payment Delivery details Terms of sales About us Contact us Payment We accept the following: PayPal MastercardVisaAmerican Express Discover Delivery details Has my order been shipped? You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take a longer processing time, please allow time for USPS page to populate. Terms of sales How do I cancel my order?As we process orders automatically, it may not be possible to cancel an order between the times of placing the order and delivery. Please email our sales team for further assistance. Returns, Replace, Refunds & CancellationsHow can I return my product and request a refund?We hope you are entirely satisfied with your purchase, but if you are dissatisfied, we will issue a refund within 30 calendar days from the date of delivery of the product. You should email us for steps to take on returns, defective LED or order cancellations etc. About us About New York LED Luminaries (NYLL) NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts. Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder. Contact us You can contact NYLL support from 9am-5pm EST, M-F. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.Ordering in Bulk? We can help.Contact us via email 9am-5pm EST, M-F for more information. PaymentShippingReturn policyAbout us On Dec-01-20 at 11:54:05 PST, seller added the following information:
This makes retrofitting quicker, easier, and more cost-effective. Uses the existing ballast for fast, easy LED conversions in seconds. Instant ROI!
Store category Sign Up Now ! You may also like Product Description Plug & Play – T6 Single Pin Fluorescent Tube Replacement – FA8 base 42 Inch T6 Single Pin LED directly relamp and replace the 25 watt 42” fluorescent bulb F42T6 without rewiring connection or modification. It’s a plug and play product from our « Relamp Series » when switching to LED lighting. T6 LED bulb works with traditional magnetic ballasts and modern electronic ballasts in the market, so you can plug it in and quickly enjoy bright lighting. It’s fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and magnetic ballasts. Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T6 TubeSwitch on power General Specifications:Energy saving of 32% from 25 watts to 17 watts with 1870 lumens output All plastic diffuser for better light distribution, less spot reflectionsHeavy duty aluminum heat sink ensures the LED run cooler for longerPlastic and aluminum construction ensures less breakageLong life span of > 50,000+ hoursHigh lumen output > 110 lumens per wattAvailable in 3000, 4200, 5000, 6000 KelvinUses 17 watts = 25 watts equivalent2,3 bulbs per package1870 lumensNominal length 42″ T6 (1/2-1-inch diameter)Maximum overall length (M.O.L): Approx. 40” with pins (1016.0 mm) Single pin base type (FA8), pin-type connector Slimline series lamps for display case and designer show caseTechnical description: T6 Single Pin F42T6 Perfect for garage, basements, warehouses and industrial buildingsWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatible Equivalent replacement for:F42T6/D835F42T6/D35F42T6/CWF42T6/CWXF42T6/DF42T6/NF42T6/WF42T6/WWWhy Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY.
Store category Sign Up Now ! You may also like Product Description Plug & Play – T12 High-Output Fluorescent Tube Replacement – R17D Base 4 FT T12/HO/RDC waterproof LED directly relamps and replaces the 55/60 watt 48″ fluorescent bulb F48T12/HO without rewiring or modification. It’s a Plug and play product from our « Relamp Series » when switching to LED lighting. T12/HO bulb works with traditional magnetic ballasts and modern electronic ballasts for maximum convenience. Also fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T12/HOSwitch on powerGeneral Specifications:Energy saving of 48% from 55/60 watts to 31 watts with 3410 lumens output Energy saving of 37% from 55/60 watts to 38 watts with 4180 lumens output All plastic diffuser for better light distribution, less spot reflectionsO Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applicationsHeavy duty aluminum heat sink ensures the LED run cooler for longerPlastic and aluminum construction ensures less breakageLong life span of > 50,000+ hoursHigh lumen output > 110 lumens/watt6000 kelvin daylight light appearance Uses 31,38 watts = 55/60 watts equivalent1 bulbs per packageSingle Sided – 3410 lumens Dual Sided – 4180 lumensNominal length 48-inch T12 (1-1.5inch diameter) Maximum overall length (M.O.L): Approx. 45.91” (1166.1 mm) with pins A.k.a T-12 High output Recessed Double Contact (RDC)Rotatable R17d end cap that swivelsEnd cap can be adjusted regardless of socket orientation in the signSpecial application lamps that are designed for cold weatherTechnical description: F48T12/HO, F48T12/HO/RDC, High output T12 HOSuitable as Walk-in Cooler, Freezer and Refrigeration equipment lightingIdeal for vertical or horizontal installation, single-sided or double-sided signs Perfect for Gas stations, Signage, Billboards, cold weatherWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatibleAdditional information: T12/HO LED lamp requires 4 wires connected. It’s not compatible with 2 wires setup such as Allanson EESB ballastsPictures of the gas price sign and company sign are installed with the relamp 3FT and 6FT Daylight T12/HO waterproof lamp. Pictures are taken and provided by our customersEquivalent replacement for:F48T12/CW/HOWM F48T12/SP30/HO/WM F48T12/SP41/HO/WM F48T12/CW/HOF48T12/WW/HOF48T12/SP30/HOF48T12/SP35/HOF48T12/SP41/HOF48T12/SPX30/HOF48T12/SPX35/HOF48T12/CWX/HOF48T12/D/HOF48T12/W/HOF48T12/SGN/HOF48T12/D830/HO F48T12/D35/HOF48T12/CW/HOF48T12/CWX/HOF48T12/D/HOF48T12/DSGN50/HOF48T12/LW/HOF48T12/N/HOF48T12/WW/HOF48T12/C50/HO F48T12/SPEC30/HOF48T12/SPEC35/HOF48T12/SPEC41/HOWhy Plug & Play LED?Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible.Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer.No upfront cost – eliminate the need to hire a costly electrician to do modification.Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use.Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. Payment Delivery details Terms of sales About us Contact us Payment We accept the following: PayPal MastercardVisaAmerican Express Discover Delivery details Has my order been shipped? You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take a longer processing time, please allow time for USPS page to populate. Terms of sales How do I cancel my order?As we process orders automatically, it may not be possible to cancel an order between the times of placing the order and delivery. Please email our sales team for further assistance. Returns, Replace, Refunds & CancellationsHow can I return my product and request a refund?We hope you are entirely satisfied with your purchase, but if you are dissatisfied, we will issue a refund within 30 calendar days from the date of delivery of the product. You should email us for steps to take on returns, defective LED or order cancellations etc. About us About New York LED Luminaries (NYLL) NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts. Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder. Contact us You can contact NYLL support from 9am-5pm EST, M-F. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.Ordering in Bulk? We can help.Contact us via email 9am-5pm EST, M-F for more information. PaymentShippingReturn policyAbout us
Store category Sign Up Now ! You may also like Product Description Plug & Play – T8 Medium Bi-Pin Fluorescent Tube Replacement – G13 Base30 Inch T8 LED lamp directly relamp fluorescent bulbs F30”T12, F30”T8, FO21, F21T8, F18T8 without rewiring or modification. It’s a Plug and play product from our « Relamp Series » when switching to LED lighting. T8 LED bulb works with traditional magnetic ballasts and modern electronic ballasts in the market, so you can plug it in and quickly enjoy bright lighting. It’s fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and magnetic ballasts. Installing the lamp, as easy as changing a bulb:Turn power OFF before installationRemove the existing lampInstall LED T8/T12 TubeSwitch on power General Specifications:Energy saving of 33% from 18 watts to 12 watts with 1320 lumens outputAll plastic diffuser and construction for better light distribution, less spot reflectionsLong life span of > 50,000+ hoursHigh lumen output > 110 lumens/wattAvailable in 2700, 4100, 5000, 6000 Kelvin 2700 kelvin warm white light appearance Uses 12 watts = 18 to 25 watts equivalent1 bulbs per package1320 lumensNominal length 30-inch T8 (1-inch diameter)Maximum overall length (M.O.L): Approx. 29.78” with pins T8 bulb shape, medium bi-pin base, 13 mm pin spacingTechnical description: F30”T12, F30”T8, F18T8, FO21, F21T8Perfect for Medicine cabinets lightingIdeal for general purpose applications including bathrooms and kitchensWorks with electronic and magnetic ballast only!Ballast operated lamp, not bypass compatible Equivalent replacement for:Damar 20250B – F21T8/950/30″GE 10349 – F30T8/CW/4Sylvania 23030 – F18T8/CW/K/30Sylvania 21730 – FO21/865/XP/ECOSylvania 21869 – FO21/950/30inSylvania – F21T8/950/30F21T8/950/30F21T8/TL950/30F30T8/CW/4F30″T8/CW/4F30″T12/CWF18T8/CW/K/30FO21/865/XP/ECOFO21/950/30inFO21/950/30F25T12/CW/30 Why Plug & Play LED? Simplicity for installer – The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible. Safety – Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer. No upfront cost – eliminate the need to hire a costly electrician to do modification. Energy efficient – output on lamp is significantly improved with ballast for general consumption and commercial use. Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY. For shipping to Alaska and Hawaii, please contact seller for shipping rates. Payment Delivery details Terms of sales About us Contact us Payment We accept the following: PayPal MastercardVisaAmerican Express Discover Delivery details Has my order been shipped? You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take a longer processing time, please allow time for USPS page to populate. Terms of sales How do I cancel my order?As we process orders automatically, it may not be possible to cancel an order between the times of placing the order and delivery. Please email our sales team for further assistance. Returns, Replace, Refunds & CancellationsHow can I return my product and request a refund?We hope you are entirely satisfied with your purchase, but if you are dissatisfied, we will issue a refund within 30 calendar days from the date of delivery of the product. You should email us for steps to take on returns, defective LED or order cancellations etc. About us About New York LED Luminaries (NYLL) NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts. Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder. Contact us You can contact NYLL support from 9am-5pm EST, M-F. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.Ordering in Bulk? We can help.Contact us via email 9am-5pm EST, M-F for more information. PaymentShippingReturn policyAbout us
